E6000 – Industrial Strength Adhesive – 40g with tips

Description

E6000 Craft is known for its exceptional strength, flexibility and toughness.

Formulated to meet high-performance industrial requirements, it’s versatile, flexible and adheres to most substrates.

E6000 has exceptional adhesion to wood, metal, glass, polymer clay, fiberglass, ceramics, masonry and concrete.

It also adheres strongly to leather, rubber, vinyl and many plastics.

It will not break down or become brittle with temperature extremes.

E6000 Bonds Everything So You Can Create Anything™.

Made in USA.

Before using E6000 Crystal Clear Industrial Strength Adhesive be sure to read instructions and test on small area.

1. Surface should be clean, dry and free of dirt. For best results, lightly roughen surface before use.
2. Puncture seal in neck of tube using pointer cap. Product can be used between 50 and 90 degrees F / 10 and 32 degrees C. However, fully cured adhesive can withstand temperatures from -40 to 180 degrees F / -40 to 82 degrees C.
3. Apply directly to surfaces to be bonded or repaired.
4. Allow 24 hours for curing–Maximum bond strength may not be reached for up to 72 hours.
5. For future easy cap removal, apply a thin coat of petroleum jelly to the threads of the tube before replacing the cap.
6. Clean uncured adhesive with acetone or citrus-based solvents.